Musty odors that keep coming back after cleaning
We locate the source with thermal imaging and a boroscope camera, then remediate the hidden growth and verify with air sampling. Once the source is gone, the odor goes with it.
When moisture gets behind drywall or under a crawl space, a mold remediation company in NEWPORT COAST, California needs to move fast. We are a licensed mold removal company NEWPORT COAST property owners call for same-day inspections, IICRC-certified crews, and post-remediation clearance testing. From Pelican Crest to Crystal Cove, we find the source, contain the spread, and leave your home dry and verified clean.

Mold remediation is the controlled removal of fungal growth and the moisture conditions that feed it. A mold remediation company in NEWPORT COAST, California starts with thermal imaging and moisture meters to map hidden colonies, then builds negative-air containment with polyethylene sheeting and zipper doors before any demolition begins. Technicians HEPA-vacuum surfaces, remove porous materials like drywall and insulation, and apply an antimicrobial coating or encapsulation liner to framing. The job ends with air sampling to confirm spore counts have returned to normal.
Coastal NEWPORT COAST homes face a specific set of triggers: marine-layer humidity, slab leaks in older plumbing, and crawl spaces that stay damp year-round. We routinely handle black mold growth behind bathroom tile, attic mold above cathedral ceilings, and HVAC mold contamination in second homes that sit closed for months. If you have been searching for a mold removal company near me NEWPORT COAST, our crews are based locally and can be on-site the same day you call.
Every project includes the core remediation scope: inspection, containment, removal, treatment, drying, and clearance testing. Add-ons like reconstruction, HVAC duct cleaning, and crawl space encapsulation are quoted separately once we know the scope. Here is what the standard package covers.
A certified inspector maps the affected area with thermal imaging and moisture meters, then collects air and surface samples for lab analysis. You get the lab report and a written scope of work before any demolition begins.
We seal the work zone with polyethylene sheeting and zipper doors and run negative air machines with HEPA filters for the duration. This keeps spores out of clean rooms and protects your furniture, HVAC system, and family.
Crews in personal protective equipment remove moldy drywall, insulation, and other porous materials. We HEPA-vacuum framing, apply a biocide solution or antimicrobial coating, and use dry ice blasting on structural lumber where appropriate.
Dri-Eaz and Phoenix Restoration dehumidifiers plus air movers bring framing moisture content down to 12 to 15 percent before reconstruction. We document readings daily so you can see the structure drying out.
An independent air sampling pump collects final samples, and the lab compares results to outdoor baseline. You receive a written clearance report within 48 hours. If clearance fails, we re-clean at no additional charge.
A certified mold inspector walks the property with a thermal imaging camera, moisture meter, and boroscope camera to find hidden growth. We collect air and surface samples with an air sampling pump and send them to a lab. Most inspections take 60 to 90 minutes, and lab results come back in 24 to 48 hours.
We seal off the work area with polyethylene sheeting and zipper doors, then set negative air machines with HEPA filters to keep spores from drifting into clean rooms. Air scrubbers run continuously for the duration of the job. Setup usually takes two to four hours depending on the size of the affected zone.
Crews in personal protective equipment remove moldy drywall, insulation, and other porous materials, bagging everything for disposal. We HEPA-vacuum framing and apply a biocide solution or antimicrobial coating. For heavy growth on structural lumber, we use dry ice blasting mold removal to clean without damaging the wood.
Dri-Eaz and Phoenix Restoration dehumidifiers plus high-velocity air movers bring framing moisture content down to 12 to 15 percent. Once the structure is dry, we install mold-resistant drywall and a vapor barrier where needed. Reconstruction typically runs three to seven days depending on scope.
An independent air sampling pump collects post-remediation samples, and the lab compares spore counts against outdoor baseline. If clearance fails, we re-clean at no additional charge. Most projects pass on the first round, and you receive a written clearance report within 48 hours of the final sample.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Finds temperature differences behind drywall and under flooring that indicate hidden moisture and mold growth before it becomes visible.
Measures moisture content in drywall, framing, and subfloor so we know exactly where the water is and when the structure is dry.
Lets us look inside wall cavities and under flooring without demolition, confirming hidden growth before we open a wall.
Creates negative pressure in the containment zone so spores cannot escape into clean rooms during removal.
Runs continuously to filter airborne spores and particulates, improving air quality inside the containment and the adjacent rooms.
Pull moisture out of framing and air after removal so the structure dries to 12 to 15 percent moisture content before reconstruction.
Collects air samples for lab analysis before and after remediation, providing the data behind every clearance report.
A slow supply-line leak behind the bathroom wall fed black mold growth across 40 square feet of drywall and framing. The homeowner noticed a musty smell and a faint stain on the baseboard.
We removed the moldy drywall and insulation, treated the framing with antimicrobial coating, dried the cavity to 13 percent moisture content, and rebuilt with mold-resistant drywall. Clearance testing passed on the first round.
Damp soil and poor ventilation left mold growth across 600 square feet of floor joists and subfloor. The homeowner had a persistent musty smell in the living room above.
Crews removed affected materials, HEPA-vacuumed and treated framing, installed a 12-mil vapor barrier, and dried the space to 14 percent moisture content. Air sampling confirmed spore counts back to outdoor baseline.
A roof leak above the master bedroom fed attic mold across 200 square feet of sheathing. The homeowner noticed the smell during the first rain of the season.
We removed moldy sheathing, treated framing with dry ice blasting, repaired the roof leak, and improved attic ventilation. Post-remediation testing passed with spore counts below the outdoor baseline.
Most mold calls start with a smell, a stain, or an insurance inspector's report. Here are the problems we see most often in NEWPORT COAST and how we handle each one.
Ask a pro →We locate the source with thermal imaging and a boroscope camera, then remediate the hidden growth and verify with air sampling. Once the source is gone, the odor goes with it.
Our crawl space mold removal crews remove affected materials, treat framing with antimicrobial coating, install a vapor barrier, and confirm with clearance testing. We also recommend ventilation fixes so the problem does not return.
We trace the moisture source, remove moldy drywall, treat the framing, and rebuild with mold-resistant drywall. A bathroom exhaust fan upgrade is often part of the fix.
We contain the HVAC closet, clean or replace contaminated components, treat surfaces with Benefect or Concrobium, and verify with air sampling in multiple rooms. NADCA-certified duct cleaning is available as an add-on.
Most residential jobs in NEWPORT COAST run $1,500 to $6,500 in 2026, with crawl space and attic projects at the higher end. Small bathroom ceiling mold often lands under $2,000, while whole-home HVAC mold contamination or post-flood remediation can exceed $10,000. Square footage, access difficulty, and whether reconstruction is needed drive the number. We quote the full scope before work begins.
Ask three things: for the CSLB license number, for proof of IICRC AMRT certification, and for a sample clearance report from a recent job. A legitimate company will hand over all three without hesitation. Also confirm they perform post-remediation mold testing with an independent lab rather than declaring the job done on visual inspection alone. That single question filters out most of the bad actors.
Yes. We hold a California CSLB contractor license, carry general liability insurance and workers compensation coverage, and our technicians are IICRC WRT and AMRT certified. We also maintain EPA Lead-Safe Certification for work in pre-1978 homes and follow California Department of Public Health guidelines on every project. Certificates are available on request before work starts.
Yes. Every remediation project carries a workmanship warranty covering the areas we treated, and we back it with a written clearance report from an independent lab. If post-remediation mold testing fails clearance, we re-clean at no additional charge. The warranty stays with the property documentation, which is useful when you sell and the buyer's inspector asks about past mold work.
Mold does not wait, and neither should you. Call (833) 929-5837 for same-day inspection, upfront pricing, and a written clearance report when the job is done. Our licensed, insured crews are on call 24/7 across NEWPORT COAST.
Get a Free Quote (833) 929-5837 →Call (833) 929-5837 any time, day or night. We answer live, schedule inspections same-day when possible, and send a written scope before work starts. If you prefer email, send photos of the affected area to info@moldremediationservicenewportcoast.com and we will follow up with next steps.